IR CONTROL SETTINGS
Under the
Routing Control
tab you will find settings for IR control. IR Routing by default listens to commands from the
supplied remote control, you can use alternative manufacturer profiles for integrating into existing systems or back-
wards compatibility.
Each output port can be configured to use a different IR profile, if "Default" is set, this is the profile used.
FRONT PANEL SETTINGS
Under the
Front Panel
tab you will find options for the front panel of the matrix such as turning off the status LEDs.
Note: The status LEDs are in the bottom right of the front panel, these LEDs will always appear during powerup and
turn off after 30 seconds if set to Off.
