www.pulsar.pl
PSBEN3024C
14
Fig. 12. RS485 communication with the use of the interfaces: ”INTR” and ”INTUR”.
5.4 USB-TTL communication.
If the PSU does not cooperate with any of previously mentioned network and the access to the parameters’
adjustment and memo readings are necessary, the USB-TTL ”INTU” needs to be used. This interface allows direct
connection between the computer and the PSU and it is recognisable by the operating system as a virtual COM
port.
Fig. 13. KUSB-TTL communication with the use of the USB-TTL ”INTU” interface.
5.5 ”Power security” program.
”Power security” is a computer program that has been created for displaying and analysing the information
sent from the PSU installation spots. Here is its front panel:
Fig. 14. Front panel of “Power security” program.
