www.pulsar.pl
PSBEN1012B/LCD
4
Features:
•
PN-EN50131-6 compliance, grades 1÷3 and II
environmental class
•
mains supply of 230VAC
•
uninterrupted voltage of 13,8VDC
•
fitting battery: 7Ah/12V
•
high efficiency 72%
•
PSU current efficiency:
•
0,58A – for grades 1 , 2 *
•
0,23A – for grades 3 **
•
1A – for general use ***
(see: chapter 2.1)
•
low level of voltage ripple
•
microprocessor-based automation system
•
intelligent management of PSU power’s output stage
•
serial port for communication with a computer via ”Power
Security” program
•
remote monitoring (option: WiFi, Ethernet, RS485, USB)
•
load current control
•
output voltage control
•
output fuse status control
•
dynamic battery test
•
battery circuit continuity control
•
battery voltages control
•
battery fuse status control
•
battery charge and maintenance control
•
deep discharge battery protection (UVP)
•
battery overcharge protection
•
battery output protection against short circuit and reverse
polarity connection
•
jumper selectable battery charging current 0,2A/0,6A
•
remote test of the PSU (additional module required)
•
START button for battery activation
•
STOP button for disconnecting during battery-assisted
operation
•
optical indication – LCD panel
•
electrical parameters reading, e.g.: voltage,
current
•
failure indication
•
PSU settings adjusted from the panel’s level
•
3 levels of access, password-protected
•
PSU’s operation history
•
failure history
•
real-time clock, battery-backed
•
optical indication of PSU overload OVL
•
acoustic indication of failure
•
adjustable times indicating AC power failure
•
technical inputs/outputs with galvanic isolation
•
collective failure input EXT IN
•
EPS technical output indicating AC power loss
•
PSU technical output indicating PSU failure
•
APS technical output indicating battery failure
•
internal memory of PSU operating status
•
protections:
•
SCP short circuit protection
•
OLP overload protection
•
OHP overheat protection
•
OVP over voltage protection
•
surge protection
•
against tampering: unwanted opening of the
enclosure or detachment from the mounting surface
•
convectional cooling
•
warranty – 5 year from the production date
1. Functional requirements of the PSU compliant with PN-EN 50131-6.
Requirements of
PN-EN 50131-6
Functional requirements
Grade 1
Grade 2
Grade 3
PSBEN1012B/
LCD
EPS network absence
YES
YES
YES
YES
Battery low voltage
YES
YES
YES
YES
Protection against full battery discharge
-
-
YES
YES
Battery fault
-
-
YES
YES
No battery charge
-
-
YES
YES
Output low voltage
-
-
YES
YES
Output high voltage
-
-
YES
YES
PSU fault
-
-
YES
YES
Surge protection
-
-
YES
YES
Short circuit protection
YES
YES
YES
YES
Overload protection
YES
YES
YES
YES
Output fuse activation
-
-
-
YES
Battery fuse fault
-
-
-
YES
EPS technical output
YES
YES
YES
YES
APS technical output
YES
YES
YES
YES
PSU technical output
YES
YES
YES
YES
Collective failure input
-
-
-
YES
PSU remote test
-
-
-
YES
Tamper resistance – enclosure opening
YES
YES
YES
YES
Tamper resistance – detachment from the
mounting surface
-
-
YES
YES
