www.pulsar.pl
INTRE-C
12
4.5.2 Password.
In the „Password” section, it is possible to change the default settings of the user and installer passwords.
It is recommended to change the default user and installer passwords upon the first system logging.
The new password should be entered twice in the appropriate boxes. If the two passwords do not match,
the password box will be backlit red.
Fig. 13. Changing password.
In order to confirm the introduced changes, press „Save".
4.5.3 EPS.
In the „EPS” field, it is possible to change the signalling time of the EPS technical output. The EPS output
signals the loss of 230 V supply. Under normal conditions, in presence of the 230 V supply, the output terminals
are connected together; in case of supply outage, the output goes into an opened status after the lapse of a preset
time.
Fig. 14. EPS technical output signalling time setting.
In order to confirm the introduced changes, press „Save”.
4.5.4 Date and time.
In the „Date and Time” field, a window appears in which the date and time of the system clock of the PSU
may be set. Setting correct date and time is important for keeping chronology of events stored in internal memory.
Fig. 15. PSU date and time setting.
