www.pulsar.pl
INTRE-C
10
Hovering the mouse over an element changes its backlight, evidencing the device’s status.
Three statuses are possible:
No errors
– green backlight
Errors
– yellow backlight
No communication
– grey backlight
1.
4.3 Power supply
– Status
Upon selection of the PSU in the „Devices” tab, the „Status” tab is loaded in the browser window, showing
an active flowchart of the PSU, together with parameters in individual circuits.
Fig. 9
. View of the „Status” tab.
Among the available parameters, the output voltage of the PSU, the status of the electricity network
(presence or absence), or the status of fuses may be read. Moreover, the battery block shows the current voltage,
the current drawn from the batteries, the temperature and the value of resistance.
In the picture above, the PSU signals a malfunction, which may be recognized through displays with yellow
backlight.
„Identify” button – facilitates the identification of a PSU at the installation site. Upon pressing, LED diodes
on the front panel flash for 5 seconds.
„Test” button – performs a remote battery test at any time.
„Errors” button – a window appears upon pressing, displaying the current errors of the PSU, if any.
PSU
identification.
Battery test.
Fuse status
Output
voltage
Status of
technical
inputs
Status of
technical
outputs
Status of the
230 V AC
network
Battery
parameters
PSU version
List of errors
