www.pulsar.pl
INTRE-C
13
Device time
– current system clock time of the PSU.
Browser time
– current browser time of the local computer.
Set the browser time
– upon selection, the PSU time is synchronized with the browser time.
In order to confirm the introduced changes, press „Save”.
4.5.5 Display.
In the „Display” field, it is possible to set the display parameters of the LCD panel of the PSU. This includes
change of the menu language, backlight intensity, contrast, malfunction signalling of the PSU with flashing
backlight, and key lock.
Intensity of LCD backlight can be set in range from 0 to100%, in 10% intervals.
Display features a function of constant or temporary backlight mode. In temporary mode, screen will turn off if no
buttons are pressed within 5 minute.
Fig. 16. Display parameters setting.
In order to confirm the introduced changes, press „Save”.
4.5.6 RS485/TTL.
In the RS485/TTL field, the communication parameters of the PSU may be manually set. To enable the
establishment of communication between the PSU and the interface, the communication parameters must be
identical in both devices.
If communication takes place between a PSU and an INTE-C interface, the address and
connection speed settings may be omitted. Full connection configuration, including the address and
speed, is performed using the „Detection” function, as described in the section „INTE-C Interface –
Detection”.
Fig. 17. Communication parameters setting.
In order to confirm the introduced changes, press „Save”.
