Pulsar blackbox 134, Instruction Manual

Page: 80 / 121

Page
72
P932 Time
This parameter shows the current time and can be reset if required, in the
format HH: MM (24-hour format). This is set initially at the factory for UK
time.
P933 Date Format
This parameter allows you to alter the format that the date is displayed to your
choice of DD: MM: YY, MM: DD: YY or YY: MM: DD. The default is DD:
MM: YY.
Daylight Saving Time
Important Information
In order to ensure the correct operation of Daylight Saving Time
P932 Time should be checked, and adjusted if necessary, to ensure
that it is set for the current valid time.
P970 DST Enable
When Enabled (set to 1 ) the internal clock will be automatically adjusted to
compensate for the difference between standard time and Daylight Saving
Time. Default = 0 (Off)
P971 DST Difference
This parameter sets the time difference between standard time and Daylight
Saving Time. The time difference is entered in HH: MM. Default = 01:00
P972 DST Start Time
This parameter is used to set the time of day at which Daylight Saving Time
will start , the time is entered in the format HH: MM (24-hour format).
Default = 02:00