background image

 

 

UC10.241, UC10.242

 

 

UC-Series 

24V,

 

15A,

 

CAPACITOR-BASED

 

DC-UPS 

 

 

19.

 

A

PPROVALS

 

 

EC Declaration of Conformity 

 

The CE mark indicates conformance with the 
- EMC directive and the 
- RoHS directive. 
CB Scheme,  
Information Technology Equipment 
Applicable for altitudes up to 2000m. 

IEC 60950-1  
2

nd

 Edition 

 

UL 508 

IND. CONT. EQ.

 

Listed for use as Industrial Control Equipment; 
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01); 
E-File: E198865 

UL 60950-1 
2

nd

 Edition 

 

Recognized for use as Information Technology Equipment, 
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1); 
E-File: E137006 
Applicable for altitudes up to 2000m. 

ANSI / ISA 12.12.01-2007 
Class I Div 2 

 

Recognized  for use in Hazardous Location Class I Div 2 T4 
Groups A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2007) and 
Canada (C22.2 No. 213-M1987) 
Approval for

 

use in hazardous locations Zone 2 Category 3G. 

Number of ATEX certificate: EPS 15 ATEX 1 025 X 
The power supply must be built-in in an IP54 enclosure. 

EN 60079-0, EN 60079-15 
ATEX 

  

II 3G Ex nA nC II T4 Gc

 

Suitable for

 

use in Class 1 Zone 2 Groups IIa, IIb and IIc 

locations. Number of IECEx certificate: IECEx EPS 15.0049X 

IEC 60079-0, IEC 60079-15 

IECEx 

EAC TR Registration 
(only for CP10.241) 

 

Registration for the Eurasian Customs Union market 
(Russia, Kazakhstan, Belarus) 

 

 

 

20.

 

R

O

HS,

 

REACH

 AND 

O

THER 

F

ULFILLED 

S

TANDARDS

 

 

RoHS Directive 

 

Directive 2011/65/EU of the European Parliament and the 
Council of June 8

th

, 2011 on the restriction of the use of 

certain hazardous substances in electrical and electronic 
equipment. 

REACH Directive 

 

Directive 1907/2006/EU of the European Parliament and the 
Council of June 1

st

, 2007 regarding the Registration, 

Evaluation, Authorisation and Restriction of Chemicals 
(REACH) 

 

May 2016 / Rev. 2.2 DS-UC10.241-EN 
All parameters are specified at 24V, 10A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted. 

www.pulspower.com   Phone +49 89 9278 0    Germany 

19/27

Summary of Contents for DIMENSION UC Series




























Reviews: