51
1)
Brightness
Image bright 0~100, slider control, on the right shows the corresponding numerical. Default 43.
2)
Saturation
Saturation 0~100, slider control, on the right shows the corresponding numerical. Default 50.
3)
Contrast
Contrast0~100, slider control, on the right shows the corresponding numerical. Default 57.
4)
Sharpness
Sharpness0~100, slider control, on the right shows the corresponding numerical. Default 16.
5)
Hue
Hue 0~100, slider control, on the right shows the corresponding numerical. Default 50.
6)
Distortion
Adjusted the wide-angle lens image distortion occurs, controllable range 0 ~ 100, right shows the corresponding
numerical. Default 0.
7)
Flip & Mirror
T
ick Flip to realize image upside down, tick mirror to realize image around the mirror. Default not tick.
8)
Button
Adjusting the parameters, press "apply" button to save, press "cancel" button to cancel the adjustment of the
parameters, press "default" button obtain the default value.
3
Audio Setup,please click “Audio”
Summary of Contents for 20X-IP
