PTZ Optics 20X-IP User Manual Download Page 2

Page: 2 / 65

Preface

Thanks for using this HD Video Conferencing IP-Camera.

This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please

read the manual thoroughly.

Precautions

This product can only be used in the specified conditions in order to avoid any damage to the camera:

n

Don’t subject the camera to rain or moisture.

n

Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal operation, contact the

authorized engineer.

n

Never operating under unspecified temperature , humidity and power supply.

n

Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neuter detergent;

do not use any type of solvents, which may damages the surface.

Note

This is class A production. Electromagnetic radiation at the specific frequency may affect the image quality of TV in

home environment.

Summary of Contents for 20X-IP


































































Search results

Summary of Contents for 20X-IP

Reviews:

Related manuals for 20X-IP

Brands by name

Popular brands

PTZ Optics 20X-IP, User Manual

Search results

Summary of Contents for 20X-IP

Reviews:

Related manuals for 20X-IP

Brands by name

Popular brands