42
Enter new IP in "IP" bar, subnet mask in "Mask" bar, Gateway,First DNS, MAC address,and click “Set”. Shown as
above.(For example: if your PC IP is 192.168.1.88, then camera IP must be 192.168.1.xx, the first, second, third number
must keep the same)
NOTE
!
IP camera default IP address"192.168.100.88", user "admin", password "admin".
2
Visit/Access IP Camera
2.1
Input http://192.168.100.88 to IE ( better with IE web browser, others will cause little latency),a login
window pop up, input login name: admin, password: admin, shown as below:
Summary of Contents for 20X-IP
