4
rev. 7-2017 114A3873.D
Wireless Door Alarm System
#8 Plastic screw anchor - use 0.250"
drill for pilot hole.
#8 × 1" FH Sheet metal screw -
use 0.116" (#32) drill for pilot hole.
#8 × 1/2" FH Sheet metal screw - use
0.116" (#32) drill for pilot hole.
6-32 × 3/8" PH Thread cutting screw.
#6 × 1-1/2" FH Sheet metal screw.
1
3A
3B
2
(For transmitter lid)
(For fastening transmitter to
mounting plate)
(For sheet metal mounting)
(For concrete mounting)
Tools & Equipment
The following list of tools and equipment is needed for successful
installation of the transmitter assembly. Before beginning the
installation, gather the following required tools and equipment.
Most of these tools are available from PTI Security Systems.
• PL Premium
®
Construction Adhesive
• Screw drivers (battery-powered recommended)
• Caulking Applicator Gun (standard tube size)
• Drill with Bits
• Concrete Drill Bits (depending on building construction)
• Transmitter Mounting Hardware Kit (See “Drawing 3:
• Pop Rivet Tool (See “Drawing 2: Rivet tool” on page 3)
The rivet tool has a special extension on the nose piece that
allows it to align properly with the magnet mounting holes
• Pop Rivets for Magnet Mounting (See “Drawing 2: Rivet
• Transmitter alignment tool
Drawing 3: Mounting hardware kit
