Wireless Door Alarm System
37
114A3873.D rev. 7-2017
Time Format
Time Format:
12 Hour
Press
*
to Change,
PRESS # WHEN DONE
The Time Format parameter controls the format of the time shown
on the display. It does not affect the date or time from the controller.
The options are
12 Hour
and
24 Hour
. The factory default is
12
Hour
.
Check in Fail Time
Check-In Fail Time:
in minutes: 240
Press
*
to Change,
PRESS # WHEN DONE
Check in Fail Time controls the length of time the Multiplexer gives
a door transmitter to check in before the Multiplexer assigns a
“Failed to Report”
to the transmitter. Door transmitters
must check in at least once during this time period. The time is set
in minutes, current factory default is 240 minutes.
