Wireless Door Alarm System
33
114A3873.D rev. 7-2017
Setting the Operating Parameters via
‘Setup Mode’
The operating parameters determine how the display will appear
and the unit will function. Setup mode allows changes to the
operating parameters for customization. To enter setup mode,
press the
*
key until the display shows:
When this display appears, press the
#
key to enter setup.
The multiplexer will ask for the setup password, the factory default
password is 8898. If an invalid password is entered, the multiplexer
will resume normal operation. The numeric password code should
be changed to restrict access to Setup Mode.
When the correct setup password is entered, the multiplexer
display changes and prompts for the unit address. The following
sections describe each of the setup parameters in the order in
which they appear
ENTER SETUP MODE?
Press
*
to Change,
PRESS # WHEN DONE
