PST Michell Instruments S8000 -100, User Manual, Page: 58 / 68

S8000 -100 User Manual
50 97606 Issue 1, June 2021
APPENDIX B
Address Access Data Type Register Map Definition Max. Min. Default
206 R|W|F boolean RH_WMO 1 0 0
0 = off
1 = on
207 R|W|F boolean PPM
V
_ON_WET 1 0 0
0 = off (dry)
1 = on (wet)
208 R|W|F float MOL_WEIGHT_MS 999999.9 0 28.9645
209 R|W|F MOL_WEIGHT_LS
User configuration – DCC/FAST
220 R|W|F boolean DCC_SETPOINT_MODE 1 0 1
0 = absolute
1 = relative
221 R|W|F int16 DCC_TEMPERATURE [°C/°F**] 25000 0 2000
setpoint in degrees = value / 100
222 R|W|F boolean DCC_INTERVAL_MODE 1 0 0
0 = manual dcc's
1 = auto (timed) dcc's
223 R|W|F uint16 DCC_INTERVAL_MINS 65535 0 240
224 R|W|F uint16 DCC_DURATION_MINS 65535 0 2
225 R|W|F float FAST_SETPOINT_MS [°C/°F] [-2 °C] [-22 °C] [-3 °C]
226 R|W|F FAST_SETPOINT_LS [°C/°F]
227 R|W|F boolean FAST_ENABLE 1 0 1
0 = disabled
1 = enabled
RESERVED
229 R|W|F uint16 STABILITY_BAND [°C/°F] [20.0 °C] [0.1 °C] [0.2 °C]
band (degrees) = value / 1000
User configuration – Chiller
232 R|W|F float CFNG_MANUAL_SETPOINT_MS [°C/°F] [40.0 °C] [-100.0 °C] [0.0 °C]
233 R|W|F CFNG_MANUAL_SETPOINT_LS [°C/°F]
234 R|W|F boolean CFNG_MODE 1 0 1
0 = Automatic setpoint
1 = Manual setpoint
User configuration – Hold Settings
238 R|W|F uint16 DATA_HOLD_TIMEOUT_MINS 60 20 45
239 R|W|F boolean ENABLE_DATA_HOLD 1 0 1
0 = disabled
1 = enabled
User configuration – Temperature Sensor
240 R|W|F boolean AMBIENT_SENSOR_SOURCE 1 0 0
0 = External
1 = Manual
241 R|W|F float MANUAL_AMBIENT_MS [°C/°F] [150.0 °C] [-60.0 °C] [23.0 °C]
242 R|W|F MANUAL_AMBIENT_LS [°C/°F]
User configuration – Pressure Sensor
RESERVED
RESERVED
RESERVED
RESERVED