Operation, Calibration & Service Manual
LinkBelt - DS350 1334 Console
Fig. 3:
Removal of the Anti Two-Block Retainer
Fig. 4:
Retainer in Storage Position
4. Turn the flag of the retainer for best visibility for the operator (5).
Removal and Storage of the Anti Two-Block Retainer Procedure (see Fig. 3 and 4):
1. Pull the cable out of the switch (1) and bend back parallel to the boom and hold (2).
2. Move the retainer down (3) and t hen left (4) to remove it from the Anti Two-Block switch. Release
the cable.
3. For storage slide the retainer from right side ( 5) over the Anti Two-Block switch unt il the clips ( A)
lock into the holes (B).
