PSC LazerData 12000 Series, Installation Manual

Page: 57 / 58

LazerData
®
12000 Scanner Installation Manual
6.2 - Technical Features
DSP MODELS
(Note 1) NPP MODELS
(Note 1)
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
Up to 22 readable symbologies including:
Code 93 (Standard and Full ASCII)
• •
EAN/UPC (including Add-on 2 and Add-on 5)
• •
Code 39 (Standard and Full ASCII)
• •
2/5 Interleaved
• •
Codabar
• •
Code 128
• •
EAN 128
• •
Plessey –
•
CODE SELECTION up to six codes during one reading phase
CODE POSITON can be verified and
displayed cannot be verified and
displayed
DECODING SAFETY
can enable multiple good reads of same code
HEADERS AND TERMINATORS up to four headers and four terminators
OPERATING MODES
ON LINE
,
AUTOMATIC
,
SERIAL ON LINE
,
TEST
CONFIGURATION MODES
•
through menus using LDHOST utility
•
receiving commands from one of the serial
ports (HOST MODE)
PARAMETER STORAGE
Non-volatile internal EEPROM
ENVIRONMENTAL FEATURES
Operating temperature (Note 4)
0º to 40
°
C (32º to 104ºF)
Storage temperature
-20º to 70
°
C (-4º to 158ºF)
Humidity max. 90% noncondensing
Vibration resistance IEC 68-2-6 test FC 1.5 mm;
10 to 55 Hz; 2 hours on each axis
Shock resistance IEC 68-2-27 test EA 30G;
11 ms; 3 shocks on each axis
Protection class IP65
PHYSICAL FEATURES
Physical dimensions 101 x 83.5 x 42 mm (4 x 3.3 x 1.7 inches)
Weight 800 g. (1.8 lbs.)
Note 1: Refer to section 1.3 for model descriptions.
Note 2: Features given are typical at a 25
°
C / 77ºF ambient temperature (if not otherwise indicated).
Note 3: Further details given in sections 3.3 and 3.4.
Note 4: If the reader is used in high-temperature environments (over 35
°
C / 95ºF), use of the Beam
shutter is advised (for details refer to the section "Beam shutter" in the Help Online of the
LDHOST utility program provided with the LazerData 12000 Scanner program disk.