PSC LazerData 12000 Series, Installation Manual

Page: 23 / 58

LazerData
®
12000 Scanner Installation Manual
2.6 - Installation
2.6 JUNCTION BOX (JBOX) INSTALLATION
The JBOX provides a passive connection between your scanner and outside system
communication cables in a fast and practical way. It is an alternative to the 25-pin
connector models. Figure 2.5 shows the basic layout of LazerData 12000 Scanner
using the JBOX.
12000 Scanner
Scanner
cable
Junction Box
System cables
Figure 2.5 - Scanner using JBOX
For JBOX connections, the scanner has a cable that terminates in a 24-pin
connector that plugs into the junction box. The system cables pass through six
external compression connectors on the JBOX and the individual cable wires
connect to internal spring-clamp terminal blocks that provide access to all scanner
signals.
2.6.1 Mounting the JBOX
The diagram below shows the JBOX dimensions and mounting hole locations.
mm
in
Compression connectors PG7 N°6
Figure 2.6 - JBOX dimensions