PSC LazerData 12000 Series, Installation Manual

Page: 27 / 58

LazerData
®
12000 Scanner Installation Manual
2.10 - Installation
4) After wiring the JBOX and while the scanner is unplugged from the power
supply (see Figure 2.11) –
•
place the scanner cable so that the rubber seal fits into the cutout in the
housing of the junction box, and
•
plug the 24-pin connector into connector J1 on the PCB inside the JBOX.
Rubber seal
Scanner cable
J1
Figure 2.11 - Scanner cable connections to the JBOX
5) Close the JBOX using the four cover screws ensuring the rubber seal is fitted
correctly between the parts of the housing.
You have now installed the JBOX and completed the electrical connections for your
scanning system.
Should it become necessary to disconnect the scanner from the JBOX, simply
reverse the procedure in step 4.