PSC LazerData 12000 Series, Installation Manual

Page: 24 / 58

Installation Manual LazerData
®
12000 Scanner
Installation - 2.7
The JBOX is designed to be mounted to a panel (or wall) of metal, plastic or other
appropriate material using the mounting screws provided in the package. To mount
the JBOX –
1) Open the JBOX by unscrewing the four cover screws.
If necessary, you can use the JBOX itself as a template through which you can
mark the locations for the mounting screws. Once you mark the mounting screw
locations, set the JBOX aside and drill two small pilot holes in the panel or
wall.
2) Align the JBOX on the panel pilot holes, insert the two self-threading screws
with their washers through the JBOX, and screw them into the panel until tight
(see Figure 2.7) and the JBOX is securely fastened.
Figure 2.7 - Mounting JBOX