4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.psaudio.com
Troubleshooting 11
®
Troubleshooting
©2014 PS Audio Inc. All rights reserved.
Owner’s Reference
DirectStream DAC
DirectStream has enough output gain to directly drive most power amplifiers without a
preamplifier. DirectStream's volume control is a no-loss design and may be used at any
setting from 1 to 100 without fear of resolution loss.
However, if there is too much gain when you connect directly to a preamplifier or power
amplifier, it is possible to select a lower output gain setting. To do so, go to the setup
touch screen on DirectStream and choose the lower output option (see the Quick Start
guide). You can also turn the output attenuator on or off by pressing the Filter button on
DirectStream's remote control.
Too much gain
