6
About this handbook
This handbook is designed to help you start printing with the Original Prusa SL1S as fast as
possible. It’s divided into several main parts -
pay close attention to chapters about correct
usage, health risks, calibration and first print.
Product details
Title: Original Prusa SL1S SPEED
Manufacturer: Prusa Research a.s., Partyzánská 188/7A, Prague, 170 00, Czech Republic
Contact e-mail:
EEE group: 3 (IT and/or telecommunication equipment)
Device use: indoor only
Power supply: 100-240 VAC, 1.8 A (50-60 Hz)
Working temperature range: 18 °C - 32 °C, indoor use only
Working humidity: 85 % or less
Compatible resins: 405nm wavelength
Declaration of conformity can be downloaded from
Assembled printer weight (gross / net): 14.7 kg / 10.6 kg. The serial number is located on the back of the printer,
in the printer’s support menu and also on the packaging.
Original Prusa SL1S is equipped with a wireless network card. This wireless module complies with IEEE 802.11
b/g/n standard and it can achieve a speed of up to 72.2Mbps with single stream in 802.11n draft, 54Mbps as
specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. The integrated module
provides SDIO interface for Wi-Fi.
Licenses
The Original Prusa SL1S is published under a GNU GPL v3 license
(
www.gnu.org/licenses/gpl-3.0.en.html)
. If you improve, or alter any part of, the printer, and you
want to sell them, then you have to publish the source code under the same license. Source codes
can be found at
https://www.github.com/prusa3d
Warranty
The pre-assembled Original Prusa SL1S printer is covered by a
24-month warranty for end customers in the
EU and 12 months for businesses and non-EU customers.
The warranty period begins with the day when the customer receives the goods. WARNING:
The exposure
display and the FEP foil fall into the category of normal wear and tear components,
which are not covered by
our standard warranty. The lifespan of the exposure display is a maximum of
2000 hours of printing
- the SLA
3D printing process on the Original Prusa SL1S is considered the standard way of using and wearing the
original display.
The lifespan of the FEP foil is 10 cycles.
When used properly in accordance to the instructions in the official
guides (such as this handbook), the life expectancy of the FEP foil can be several times longer.
Neither the Seller's liability for defective products nor the quality warranty apply to printers or parts damaged by
handling, which is in conflict with the instructions and recommendations in the official manuals and guides, or
improper handling caused by unofficial modifications, such as modifications to hardware or software.