21
The tank has a max level mark
Do not overfill the tank!
Any time you are asked to refill the resin to the max, it always means adding it up to the 100%
mark, not to the edge of the tank!
4.8. Running out of resin / Adding resin mid-print
The SL1S features a built-in resin level sensor, which measures the amount of resin in the tank
before every print. Some models might be
too large
and require
more than the maximum
amount
of 200 ml resin in the tank. The printer can recognize when the resin starts running low
and
pauses the print.
An on-screen message is displayed, asking you to fill resin back to the max
level mark. Once you refill the resin, you can press the on-screen
Continue button
to resume the
print.
Keep in mind that in certain cases (especially if the print has been paused for a long time), the
new layer may not adhere perfectly to the rest of the object - or not adhere at all.
