6 Alarm status
VIBGUARD IIoT provides an overview listing the current threshold violations and sensor errors.
Opening the alarm status page
l
Click on <System> in the navigation bar.
l
Click on <Alarm Status Information> in the “Administration” field. The
Alarm status page
is displayed:
The list contains all the measurement locations that exhibit a deviation from the normal condition in the current
measurement cycle. The list displays the following information:
Alarm Location
: Storage location number of the measurement in question
Alarm
: Error type; threshold violation as
Alarm, Warning, Prewarning
or
SensorFail
(sensor error)
Job name
: Label for measurement location
Task name
: Label for measurement task
Clear (All):
Resets the error message
Press the F5 key to update the list (refresh browser). You can reset an error message using <Clear>. However, the
error message is displayed again if the status in question still exists at the next measurement cycle. To this end, the
list must always be updated manually (F5).
The alarm messages are archived in the OMNITREND Center software. They must also be acknowledged
accordingly there.
Note
In the event of a sensor error, you must check the measurement location in question:
• Visual inspection of the sensor and wiring;
• Check the voltage supply if the sensors are supplied externally.
VIBGUARD IIoT
19
Operation
Summary of Contents for FLUKE VIBGUARD IIoT
Page 6: ...Empty page ...
