10 Data transmission by email
For security reasons, the measurement data is transferred from VIBGUARD IIoT to an SMTP server at least once
every 24 hours. The input of the measurement data into the OMNITREND Center database can be triggered directly
from the PC software or, automatically, via the
E-Mail Center
program.
The E-mail Center application is part of the
OMNITREND Center server installation
and is preferred for systems
with very high data volumes. The measurement data is retrieved from the SMTP server and imported into the data-
base. Emails with status information (alarms, sensor errors) are sent directly from the CMS to the intended reci-
pients.
The following section describes configuration of the E-Mail Center application.
10.1 Configuring the E-Mail Center
l
Start the
OMNITREND Center Utility
application.
l
If necessary, install the
Email-Center
module:
l
If the module status display is still gray, activate the "Email Center” checkbox.
l
Click on <Install>. The status display changes to yellow if installation was successful.
l
Click on <Settings> in the main menu and then on <E-Mail Center Settings>.
l
The OMNITREND Center Server is stopped during configuration (status display: gray).
Enter the account and login details on the SMTP server in the following submenus. The emails are retrieved using a
configurable task via POP3 and the Fetchmail function and are processed in the E-mail Center.
VIBGUARD IIoT
25
Operation
Summary of Contents for FLUKE VIBGUARD IIoT
Page 6: ...Empty page ...
