67
Network control operation
Function: This function is designed to remote control computer in the same LAN.
Preparation
1 Required equipment: Projector, connection, network cable
2 Connection:
Connect your projector to a router or switch in the LAN with normal or jumper network
cable. In case a normal network cable failed to connect successfully, use a jumper cable
instead.
3
powered on.
Operation steps
1 Power on your projector.
2 Acquire the IP address, with DHCP set to on and auto IP allocation set to On. (You
may set DHCP to Off and set up IP address manually if you are somehow familiar with
networking.)
3 Enter the network setup menu
(1) Press MENU key on remote
controller or top of the control panel,
press
key to select network
icon.
(2) Press ENTER key or key and the
network menu displays.
(3) Press
key select network
settings and press ENTER to
(4) Press
key to set DHCP On and
(5) Press
key to select OK, press
ENTER to wait until the “Please
wait..” message disappears.
Description on network control operation
设置
network
network setup
network setup state
设置
network
network setup
network setuo state
YES
NO
LAN
network setup
DHCP
close
IP
Address
192
. 168 . 1 . 100
Subnet
255
. 255 . 255 . 0
Gateway
192
. 168 . 1 . 1
DNS
192
. 168 . 1 . 1
