Version 1.0
3
Disclaimer
3
Prowinch® LLC declares that it has made all safety recommendations related to the purchased product
to the customer. As a result, it does not assume any responsibility for any damages or losses that the
client or third parties may suffer. These can be caused by or as a direct or indirect result of a breach or
omission of instructions or safety warnings in the User Manual and Security Warnings provided with the
unit purchased. Prowinch® LLC will not be liable for accidents and/or damages to persons and/or
property resulting from the negligent use of the product. In no case does Prowinch® LLC assume any
liability arising from using these voluntary recommendations and does not offer any guarantee
concerning them. These recommendations do not take precedence over the current safety regulations
of the plant. For purposes of enforcing the warranty of the product purchased, Prowinch® LLC, will only
be liable for any damage when proven the user has followed each one of the warnings contained in the
User Manual and Safety.
1.
It is the sole responsibility of the Client / User to verify that the acquired equipment, products, and
accessories comply with the characteristics, capacities, requirements, components, accessories, and
other conditions for the use that the Client/user intends to give it.
2.
It is also the sole responsibility of the Client / User to ensure that the equipment and products
purchased are operated and maintained with adequate safety standards and by personnel properly
trained in their use. The Client / User is also responsible for implementing all security measures
necessary to prevent accidents or damages to people or property and for following the indications and
warnings of the corresponding manual.
3.
Any assistance provided by Prowinch® LLC in selecting the equipment, capacities, and characteristics
required by the client is delivered free of charge and based on the information about the application,
use, and requirements provided by the client. It is not the responsibility of Prowinch® LLC to verify the
accuracy of the given information. It is the sole and exclusive responsibility of the client -or who will use
the equipment and products acquired- to ensure that the specifications comply with the capabilities,
characteristics, up-to-date maintenance, and everything necessary for a correct and safe operation
about the intended use.
4.
Prowinch® LLC recommends using winches with four brakes for personnel lifting. The use of winches
with three brakes or less, or operating with safety standards less than required for personnel lifting is
not recommended.
5.
To guarantee the safety of the equipment's operators, it is necessary to conduct inspections and
maintenance of the equipment according to the recommended frequency of its work cycle. It is
mandatory to keep records and evidence, including written and photographic reports of: Maintenance,
Start-
up, Load Tests, Training, Certifications, Inspections, and Reports of failures and accidents.
6.
The reports mentioned above must be emailed to [email protected] within the first seven
calendar
days after an event.
7.
Compliance with timely implementation of mandatory activities described in points 6 and 7, in
addition to all the activities mentioned in the corresponding guidelines, are the user's sole responsibility.
Failure to comply with the preceding conditions releases Prowinch® LLC from any liability. The
information contained in this manual may contain technical errors or inaccuracies. Prowinch® LLC is not
responsible for errors, omissions, or incorrect information. This manual is subject to change without
prior notice. Download the latest version available at www.prowinch.com. Always check
www.prowinch.com for the latest information regarding this product.
Please check our warranty policies on
our website www.prowinch.com/warranty.
PROPERTY REGISTRY Nº 189487
ANY REPRODUCTION IS FORBIDDEN
PROPERTY OF PROWINCH® 2022 - V
8.0
ALL RIGHTS RESERVED
PROWINCH LLC COMPANY WITH QUALITY MANAGEMENT SYSTEM
PROWINCH® DISCLAIMER
V.07.22 [LA]
Summary of Contents for PWJTHF
