RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 4 -
306" Rcpgn"Nc{qwv"
30603" Vjg"Htqpv"Rcpgn"
Figure 1-1 Front Panel sketch
The Router’s LEDs are located on the front panel (View from left to right).
Pcog"
Uvcvwu"
Kpfkecvkqp"
Off
Power is off.
PWR
On
Power is on.
Flashing
The Router is working properly.
SYS
On /Off
The Router has a system error.
Off
The Wireless function is disabled.
WLAN
Flashing
The Wireless function is enabled.
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
WAN,
LAN 1-4
Flashing
There is an active device linked to the corresponding port.
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
WPS
Quick Flash
A wireless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs Description
"
Pqvg<"
1. After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2. When press and hold the WPS/Reset button for more than 5 seconds, you will reset the
router.
