Proware EP-4423, User Manual

Page: 26 / 181

Fibre to SAS/SATA RAID Subsystem
26 User Manual
2.1.1.3 LCD IP Address in Dual Controller Mode
In dual controller mode, the RAID subsystem has 2 IP addresses which can be
accessed separately.
By default, the IP address of Controller 1 is shown.
To view the IP address of Controller 2, press the “Down Arrow” button in the
front panel three (3) times.
When the IP address of Controller 1 is shown, there is no blinking rectangular
character at the end of the IP address.
When the IP address of Controller 2 is shown, there is a blinking rectangular
character at the end of the IP address.
When the IP address has a link (connected to network), there is an “*” at the end
of the IP address. When there is no link, there is no “*”.
Controller 1 IP Address (No rectangular character)
Controller 1 has Link Controller 1 has no Link
Controller 2 IP Address (With rectangular character blinking)
Controller 2 has Link Controller 2 has no Link