Proware EP-4423, User Manual

Page: 58 / 181

Fibre to SAS/SATA RAID Subsystem
58 User Manual
2. Turn on each Power On/Off Switch of the PSFM.
NOTE: When the power cord connected from main power source is
inserted to the AC Power Input Socket, the Power Status LED
becomes
RED . When the switch of the PSFM is turned on, the LED
still shows RED . After the main switch in front panel is turned on,
the LED turns GREEN , which means it is functioning normally.
3. To power on the subsystem, turn on the main switch (open first the switch cover)
in the right corner side of front panel.
Main
Switch
4.
Allow the machine a few moments to initialize before using it.
NOTE: The system will initialize after turning on the Main Switch.
Each disk slot will be checked during subsystem initialization.
5.
Configure RAID using the utility options described in the next chapter.
Power Supply 01-1 Power Supply 01-2