manualshive.com logo in svg

Proware EP-3163S-F8S6, User Manual, Page: 60 / 127

Share
Download
Proware EP-3163S-F8S6 User Manual Download Page 60

 

Fibre to SAS/SATA RAID Subsystem

 

 

60 

User Manual 

 

5.2.7   Create Hot Spare 

 

The Create Hot Spare option gives you the ability to define a global hot spare. 

 

When you choose the 

Create Hot Spare 

option in the Raid Set Function, all 

unused (non Raid Set member) disk drives in the subsystem appear. Select the 
target disk drive by clicking on the appropriate check box. Tick on the 

Confirm The 

Operation

 and click on the 

Submit 

button to create hot spare drive(s). 

 

 

 

 

 

Hot Spare Type 

Description 

Global Hot Spare 

The Hot Spare disk is a hot spare on all 

enclosures connected in daisy chain. It can 
replace any failed disk in any enclosure. 

Dedicated to RaidSet 

The Hot Spare disk is a hot spare dedicated 
only to the RaidSet where it is assigned. It 
can replace any failed disk in the RaidSet 

where it is assigned. 

Dedicated to Enclosure 

The Hot Spare disk is a hot spare dedicated 
only to the enclosure where it is located. It 

can replace any failed disk on the enclosure 
where it is located. 

 
NOTE: When the Raid Set status is in 
Degraded state, this option will not work. 

 

 

NOTE: The capacity of the hot spare disk(s) must be equal to or 
greater than the smallest hard disk size in the subsystem so that 
it/they can replace any failed disk drive. 

 

 

 

 

NOTE: The Hot Spare Type can also be viewed by clicking on Raid 
Set Hierarchy in the Information menu.  

 
 

 

Summary of Contents for EP-3163S-F8S6
































































































































Reviews:

No comments