9
1.2 Enclosure Chassis
The EP-2126-SA3 is a redundant system with hot swappable disks, cooling fans and
power supplies. The chassis assembly contains 12 drive bays at the front. These drive
carriers are arranged in 3 rows of 4 drives. Each drive carrier is lockable and has a lock
indicator.
At the rear, the chassis assembly contains two power supply /fan modules and one
controller module. The power supply and cooling system is contained in one module for
efficient cooling.
NOTE: The modules of the enclosure are interchangeable with
other Epica products.
1.3
Technical Specifications
RAID Controller
U320 SCSI-to-SATA II
Host Bus Interface
Ultra 320 SCSI
Drive Bus Interface
SATA II
Data Transfer Rate
Up to 320MB/Sec
Cache Memory
256MB ~ 2GB ECC DDR SDRAM
RAID Processor
Intel 80331 64 bit RISC
Remote Management
R-Link Port
Monitor Port
RS232
1.3.1
RAID Features
RAID Level
0, 1, 0+1, 3, 5, 6, 30, 50, NRAID and
JBOD
RAID Roaming
Yes
Host Independent
Yes
Continuous Rebuild
Yes
Online Consistency Check
Yes
Failed Drive Auto Rebuild
Yes
Password Protection
Yes
Bad Block Auto-remapping
Yes
Hard Contact Relay Connection
Yes
SMTP Manager and SNMP Agent
Yes
