24
2.
Place one inner bracket to the side of the chassis. Align the holes on the front side
of the inner rail to the holes on the RAID system ear. Tighten the screw that was
removed in Step1.
3.
Use four M4 flat head screws to attach the inner bracket to one of the side. Make
sure the holes of the inner bracket are aligned to the holes on the side of the RAID
system.
4.
Repeat Steps 1 to 3 for the other inner bracket on the left side.
5.
Loosen eight M4 screws on each of the rack rails. Make the necessary adjustment
on the length of the rack rails to conform to the depth of the rack. Then screw the
M4 screws back to the rack rails.
6.
Place the right side rack rail on the rack cabinet. Use four M5 round head screws
to fix the rack rail to the rack post (Front Right and Rear Right).
NOTE: In the Front Right part of the rack rail, the M5 screws
must be placed in holes 1 and 3. In the Rear Right part, the M5
screws must be placed in holes 1 and 4.
