47
Select the desired function.
Connection Type:
1.
RS232:
Connect the Monitor port of RAID Subsystem to Server system COM1 via
RS232 cross cable. The setting of
port
is ‘COM1’ or ‘/dev/ttyS0’. The speed of
Baud
Rate
is same as controller’s setting.
2.
R-Link:
R-Link is supporting management and configuration through web-based
graphic user interface and allows users to remotely manage their storage over their
network. Connect the R-Link port of RAID subsystem to your network hub or switch.
3.
SCSI-Fibre:
Connect the host channel SCSI / Fibre connector of the RAID
subsystem to SCSI / Fibre connector of Server system. This option is for viewing
only.
-
Win32: [driver letter:] or [physicaldriveX]
-
Linux: scsi generic device; sgX
-
FreeBSD: daX
-
Solaris-Sparc: /dev/rsdXc
Click on the
OK
button to finish the operation.
6.3.3 Detach RAID Subsystem
To Detach RAID Subsystem, move the mouse cursor to
proRAIDMgr
screen, and click on
the
Information
tab. Then Select the target RAID subsystem to detach by clicking the
Detach Subsystem
button.
6.3.4 View proRAIDMgr Log
To view the proRAIDMgr Log, move the mouse cursor to
proRAIDMgr
screen, and click on
the
proRAIDMgr Log
tab. The proRAIDMgr Log Information screen appears. Use the
refresh Log
and
clear log
button to refresh or clear logs manually.
