BTP-2100E USER MANUAL
Appendix 5 Paper load guide in peel-off mode
When the users use the label with bond, the paper out mode can be set as the
peel-off mode. When loading the paper, please put the label mount through the
peel-off module according to the process as below:
1)
Take off several label at the front and confirm the label mount bottom flat,
then take away the turnplate forth
（
see Appendix-figure
5.1
）
:
Appendix-figure 5.1
2)
Put the label mount through the path mentioned in the Appendix figure
5.2
:
Appendix-figure 5.2
3)
Push the turnplate to its original place and keep the label mount tight,
then the paper load is finished.
- 33 -