Provill BTP-2100E, User Manual, Page: 34 / 37

BTP-2100E USER MANUAL
THP test information THP test information
The THP test pattern can be used to check if the THP status is normal or not. The THP test pattern can be used to check if the THP status is normal or not.
Appendix-figure 2.1 is a test pattern printed by the THP in normal status.
Appendix-figure 2.2 is the pattern printed by the THP in bad status caused by
the solid granule or damaged THP. If this THP still fail to work properly, please
contact with our distributor or manufacture.
Appendix-figure 2.1 is a test pattern printed by the THP in normal status.
Appendix-figure 2.2 is the pattern printed by the THP in bad status caused by
the solid granule or damaged THP. If this THP still fail to work properly, please
contact with our distributor or manufacture.
Appendix-figure 2.1 Appendix-figure 2.2
Appendix 3 Print and paper out position
Appendix-figure 3.1
- 30 -
„
Notice: :
„ The figure above takes the marked paper as an example to
show the print and paper out position.
„
Non-continuous paper is positioned based on the front edge of
marks.
„ The position adjustment of the print and paper out refer to
Figure
3.3.2
。