BTP-2100E USER MANUAL
2) Printer error information, buzzer and LEDs:
Error
information
Buzzer sound
LED
THP lift-up
Wrong command
functions
Paper end
Serial
communication
error
Paper checkout
error
THP voltage /
temperature
abnormal
Ribbon is used
out
System error
Flash
Table 2.3
Key-configuration functions
The printer can print the configuration content and execute the
parameter configuration using keys and LEDs’ status.
Serial interface and Parallel interface are standard interfaces of printer,
RS-232 interface is standard Serial interface, Centronics parallel
interface accords with IEEE1284. User can also choose USB interface
to replace Parallel interface.
1) Simple Parameter Settings
Key
Key Function
LEDs Status
FEED+
PAUSE
Press “FEED” and “PAUSE”, release after the
buzzer sound once, start to print simple
parameter setting menu and enter simple
parameter setting mode.
Three LEDs flash
alternately.
Press “FEED” first to confirm the change of the
paper type after entering the simple mode.
Power LED flashes
FEED
Continue to press “FEED” to switch among
label paper, label mark paper, continuous
paper.
Different
compounding of the
three LEDs means
different setting.
Press “PAUSE” to confirm changing the type of
print after entering the simple mode.
PAUSE LED flash.
PAUSE
Continue to press “PAUSE” to switch print
mode between thermal print and thermal
transfer print.
Different
compounding of the
three LEDs means
different setting.
- 7 -