BTP-2100E USER MANUAL
Figure 2.1 Figure 2.2
3) Load a paper roll on paper roll holder and add one paper roll guide
on each side of paper roll.
4) Drop paper roll on the paper holder to the paper room, then pull out the
front end of the paper and put it in the print path flatly, and also release
the paper guide to hold it. (See figure 2.3)
Figure 2.3 Figure 2.4
5) Paper roll has two sizes of I/D: 25mm (1 inch) and 38mm (1.5 inch).
When paper roll ID is different, the loading method of paper holder
into paper room will be different. Operation method is as below
(See figure 2.5 and figure 2.6).
- 9 -
Figure 2.5 Figure2.6