BTP-2100E USER MANUAL
- 6 -
Keys functions
Keys
Functions
Explanation
Feed paper
In standby status, press down “Feed” key, the
printer feeds one label for non-continuous
paper. The printer feeds paper until releasing
the key for continuous paper.
feed
key
Print self-test page
Turn on the power and press “feed” key until
buzzer sounds, then the printer starts to print
a self-test page.
In standby status, press down “Pause” key,
the printer enters pause status. When
pressing down “Pause” again, the printer
shall be back to standby status.
Pause
Press down “Pause” key in printing, then the
current print job shall pause. When pressing
down “Pause” key again, the printer shall
continuous last print job.
Confirm label is
taken away
In tear-off/peel-off mode, after the printer
shall print a label and stop without paper
sensor, the light shall be on. User presses
down “Pause” to confirm label taken away.
then printer shall retract paper and start to
print next label.
Pause
key
Paper checkout
Turn on the power and press down “Pause”
until buzzer sounds, the printer shall feed
paper and verify paper.
Cancel print job
First press “Pause” key to stop current print
job, then press “Pause” key to cancel the
print job.
Remove error
This key is used to remove printer error and
recover printer standby status
Cancel
key
Enter default Serial
communication
Turn on the power and press down “Cancel”
key until buzzer sounds, then the printer
enters default serial mode.(9600, N, 8, 1,no
Auto paper load)
Table 2.2
LEDs and Buzzer
1) Buzzer
sounds
shortly under following cases:
z
When the printer is turned on or reset with software
successfully.
z
Erase FLASH successfully.
z
Download character set, bitmap to FLASH successfully.