Proton InteliSENS DG1130, Instruction Manual

Page: 55 / 68

Page 55 of 68
Proton Products InteliSENS DG1130 Diameter Gauge Instruction Manual (Issue 1a)
INTERFACE
CONNECTOR PIN OUTS
Connector type: DB25 female (socket)
Pin Designation Functional group Description Notes
1 P0V PI feedback controller PI feedback controller ground
Isolated ground
2 POUT PI feedback controller PI feedback controller output
±10V isolated output
3 AOUT1 Analogue outputs Analogue output 1
±10V full scale isolated
output
4 AOUT3 Analogue outputs Analogue output 3
±10V full scale isolated
output
5 COM1 Relay outputs Relay 1 common
Maximum 1A / 24VDC
6 COM2 Relay outputs Relay 2 common
Maximum 1A / 24VDC
7 COM3 Relay outputs Relay 3 common
Maximum 1A / 24VDC
8 COM4 Relay outputs Relay 4 common
Maximum 1A / 24VDC
9 AGND Analogue input Analogue input ground
Isolated ground
10 LIN2 Logic inputs Logic input 2
Low < +3 V; High > +10.5
V; Max ±30 V
11 DGND Logic inputs Digital ground
For logic and speed
pulse inputs, NOT
isolated
12 SPD2 Speed pulse inputs Speed input 2 (Low voltage)
Low < +2 V; High > +4 V;
Max ±30 V
13 SPD1 Speed pulse inputs Speed input 1 (High voltage)
Low < +5 V; High > +9 V;
Max ±50 V
14 PIN PI feedback controller PI feedback controller input
Max ±20V isolated input
15 Agnd Analogue outputs Analogue output ground
Isolated ground
16 AOUT2 Analogue outputs Analogue output 2
±10V full scale isolated
output
17 NO1 Relay outputs Relay 1 normally open contact
Maximum 1A / 24VDC
18 NO2 Relay outputs Relay 2 normally open contact
Maximum 1A / 24VDC
19 NO3 Relay outputs Relay 3 normally open contact
Maximum 1A / 24VDC
20 NO4 Relay outputs Relay 4 normally open contact
Maximum 1A / 24VDC
21 - - -
Not connected
22 AIP Analogue input Analogue input
0–10 V full scale isolated
input
23 LIN1 Logic inputs Logic input 1
Low < +3 V; High > +10.5
V; Max ±30V
24 REG.GND Power supply Power supply ground (0 V)
25 +24V Power supply +24 V power supply
S Shield
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22 10 23 11 24 12 25 13