11
Rev 1
The equipment is initially commissioned by a certified ProSun technician. The device will
be properly assembled and handed over ready for us. In order to properly commission
the equipment, the business owner must ensure that the location is ready prior to the
equipment being installed. This included having correct power requirements and having the
room in which the unit will be located ready.
Installation can be requested but is not included.
If the equipment has not been used for a longer period of time, then it must first
be inspected by a certified technician before being put back into operation again.
Only one user should tan in the unit at a time.
Wear protective eyewear during the duration of the sesion to protect the eyes. Only use
approved protective eyewear. Using the equipment without protective eyewear may in
eye injury or diseases. The unprotected eye can become inflamed on the surface, and in
certain cases the retina can be damaged by exces-sive radiation. Cataracts can form after
repeated exposure to radiation.
You should not modify your equipment as it may cause serious injury or damage to your
unit.
Infections can be transfered through skin contact, the unit should be properly cleaned after
every use. All items that the user can come in contact with shall be properly cleaned and
disinfected after every session. This includes but is not limited to:
• Goggles
•
Base floor (when applicable)
• Acrylics
• Handles and control panel
• MP3 cable (when applicable)
• Headrest
Use only approved cleaner such as Lucasol One Step to clean and disinfect the unit.
Commissioning of the equipment