21
Rev 1
Equipment Operation and software
Operating Modes:
There are 4 different operating modes for this equipment.
Standby Mode
The bed is in an idle state, it is connected to the power but is currently not in use. The lamps
in the unit are not turned on at this time. While in Standby mode you can change to In Session
mode by starting a session or go into service mode by entering into the parameters.
In Session Mode
The bed is in use and the lamps are on. The session time is counting down and can be
stopped, paused or features can be changed in the control panel.
Cool down Mode
The bed has finished the red light session and now will start a mandatory cool down. During
this time the cool down time will be displayed in the control panel and the buttons have no
function if pressed. The bed must complete the mandatory cool down before being able to
enter into any other operating mode.
Service Mode
In service mode the bed parameters can be changed and the bed can be configured as
needed.
