background image

01/2022

The rights to technical and design alterations are reserved.   KBL GmbH · Ringstraße 24-26 · 56307 Dernbach · Germany

fon +49 (0) 26 89.94 26-0 · fax 94 26-66 · eMail [email protected] · www.kbl.de

Service information: SI00094

1/3

Service information

Topic: Retrofit filter capacitors in the canopy
Subject: P9/P9S (5018) devices 

This operating manual is intended for use by 
• qualified, trained and authorized service technician.
• qualified electrician.

DANGER

Live parts

Risk of death or fatal injury due to electric 
shock when touching live parts.

• Switch neutral 
• Secure against reconnection 
• Check for neutrality 
• Ground and short-circuit 
• Cover or shield any adjacent live parts or 

components

SAFETY ADVICE

Before carrying out any maintenance work, the tanning device must be disconnected from
the mains voltage and secured against being switched on again.

Remove the old filter capacitor.

• Disconnect the old capacitor at the plug
   connector (as shown in the image).
• Loosen the cable ties.
• Disconnect ground connection.

Depending on the delivery status, 

one

 or 

two

 capacitors are installed. 

• Only remove the capacitor at the lower 

LED panel.

Reviews:

Related manuals for megaSun P9