28
The Care and Maintenance in this section covers most of the difficulties that you may
encounter under normal working circumstances. If your tanning bed fails to operate properly,
please review the following steps before calling for service.
THE BED YOU PURCHASED CONTAINS VOLTAGES WHICH ARE POTENTIALLY
HAZARDOUS. ALL REPAIRS AND GENERAL MAINTENANCE SHOULD BE
PERFORMED BY QUALIFIED SERVICE PERSONNEL.
FOR YOUR RED LIGHT BED:
Safe and continuous operation of your bed depends partially on the care taken by users.
Please observe the following precautions when bed is in use.
• Do not disassemble any part of the bed while in use.
• Do not allow sharp objects in the bed while in use.
• Do not allow liquid or any foreign objects to get inside the bed.
• Ensure the beds back side is at least 8 – 12 inches away from the wall.
• Avoid having the acrylic sheets come in contact with sharp edges and objects.
• The room or cabin in which the unit is operated must be well ventilated.
• Make sure that the unit never comes in contact with water while connected to power.
•
Do not turn the machine on and off frequently within the space of 3 minutes.
• When replacing or cleaning Facial Lamps, both facial lenses and bulbs should be cleaned
with alcohol, keeping them free of smudges and finger prints.
Care and Maintenance
