24
A B C D E F
Start
Stand-alone mode:
By depressing start once the “+ and –“ buttons can be used to set the session time.
Pressing for a second time will start the unit.
Remote mode: (only for commercial units)
The unit can be started automatically by the external timer. The start button can be
used only when the unit has to be restarted from “pause”.
Stop
Stand-alone mode: (for residential units)
Pressing stop once will cause the unit to “pause”. The lights will go out but the
ventilation will continue
to run.
Pressing stop twice will initiate a mandatory after-cooling phase of 3 minutes. The unit
cannot be started during these 3 minutes.
Remote mode: (only for commercial units)
Pressing stop once will cause the unit to “pause”. The lights will go out but the
ventilation will continue
to run.
The unit will not respond to pressing stop several times. The external timer
automatically will switch the unit off. Switching off will initiate a mandatory cool down of
3 minutes. The unit cannot be started during these 3 minutes.
A
B
Illustration after-cooling
Note: Typically
Stand-alone mode
is for residential use and
Remote mode
is for commercial use
All units come standard in
remote-mode
Operation