RLXIB-IHW
♦
802.11a, b, g
Before You Begin
RadioLinx® 802.11abg Industrial Hotspot with POE and Serial Server
Setup Guide
Page 14 of 19
ProSoft Technology, Inc.
September 16, 2009
1.7
Save the Radio Configuration
Before closing the Radio Configuration window, you must apply your changes.
Click Apply Changes to save your configuration and restart the radio.
Note:
To discard your changes and start over, click Cancel Changes.
1.8
Adding and Configuring Additional Radios
At this point you should attach and configure any additional IHW radios you will
be using. Ensure that any new radios use a unique name, but the same Network
SSID as your master. The only difference in procedure will be in setting up each
additional radio. Instead of setting your additional radios as Masters, they should
be set as Repeaters or, more rarely, Clients, depending on their intended
purpose.