Contents
MVI69-GEC ♦ CompactLogix or MicroLogix Platform
User Manual
Page 32 of 86
ProSoft Technology, Inc.
February 18, 2014
Name
Data Type
Description
Server
GECServerStat[5]
Status for each server
Client
GECClientStat[5]
Status for each client
Within the GECInStat objects are objects containing the status information for each server
and the block transfer process. Refer to the Reference chapter for a complete listing of the
data stored in this object.
3.1.2 GECServerStat (Server Status Object)
The GECServerStat object stores the status information related to each individual server on
the module. All messages are counted for both the receive and transmit operations.
Additionally, the object contains the CfgErrword member. This member is discussed in the
following section. The following table describes the structure of the object.
Name
Data Type
Description
Enabled
INT
Flag to indicate if server is enabled
(1=Yes,0=No)
State
INT
Current state of server
IP
INT[4]
IP address of host connected to server
Port
INT
TCP port for host connected to server
Open
INT
Number of times server performed an open
Est
INT
Number of times connection established
Close
INT
Number of times socket closed
Rx
INT
Number of messages received
RxOverflow
INT
Number of receive buffer overflows
Tx
INT
Number of messages transmitted
TxOverflow
INT
Number of transmit buffer overflows
Timeout
INT
Number of socket timeout conditions
CfgErrword
INT
Configuration error word value for server
3.1.3 GECBlkStat (Block Error Status Object)
The GECBlkStat object holds the status data related to the data transfer between the
module and the controller. Each read and write block transferred between the module and
the controller is counted in the Read and Write data members, respectively. Each write block
that is parse by the module is counted in the Parse data member. The Err member is
incremented each time a bad block is transferred between the two devices or there is an
error in the backplane driver in the module. The following table describes the structure of the
object.
Name
Data Type
Description
Read
INT
Number of blocks read by the module
