MVI69-GEC ♦ CompactLogix or MicroLogix Platform
Contents
User Manual
ProSoft Technology, Inc.
Page 77 of 86
February 18, 2014
Parameter
Block
Offset
Start
Description
Server[1].Timeout
41
This status value contains the total number of times a
connection timeout occurred on the socket.
Server[1].CfgErrWord
42
This bit mapped word defines the configuration errors for the
server.
Server[2].Enabled
43
This flag defines if the server is utilized. A value of 0
indicates the server is not used. Any other value indicates
the server is used.
Server[2].State
44
This flag defines the current state of the server.
Server[2].IP
45
This double-word value contains the IP address of the client
connected to the server.
Server[2].Port
47
This word value contains the port address for the client
connected to the server.
Server[2].Open
48
This status value contains the total number of times the
server performed an open operation.
Server[2].Established
49
This status value contains the total number of times a
connection was established on the socket.
Server[2].Closed
50
This status value contains the total number of times a close
operation was performed on the socket.
Server[2].RxCount
51
This status value contains the total number of messages
received by the server.
Server[2].RxOverflow
52
This status value contains the total number of messages
received that exceed the specified buffer size for the server.
Server[2].TxCount
53
This status value contains the total number of messages
transmitted by the server.
Server[2].TxOverflow
54
This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the server.
Server[2].Timeout
55
This status value contains the total number of times a
connection timeout occurred on the socket.
Server[2].CfgErrWord
56
This bit mapped word defines the configuration errors for the
server.
Reserved
57
This data area is reserved for future use.
Server States
58 to 62
State of each of the five servers.
Last Write Count
63
This word contains the number of characters written on
server from last BTR block.
If word 1 of the Input Image block is set to -2, the data for the last two servers is passed to
the processor. The format of this block is as follows:
Parameter
Block
Offset
Start
Description
Seq Number
0
Sequence number for this block.
Server Index
1
For this status data block, this word is set to a value of -2.
PassCnt
2
Program cycle counter
Product
3
Product name as ASCII string
