ProScan HDTV, User Manual

Page: 15 / 100

Setup and Connections
11
INPUT 1 Lets you connect a baseband NTSC (analog) component such as a VCR,
laserdisc player, Internet access device, or DVD player.
• VIDEO provides composite video connection. The video connector is usually
yellow.
• L AUDIO provides left audio connection. The left audio connector is usually white.
• R AUDIO provides right audio connection. The right audio connector is usually red.
• S-VIDEO lets you connect an S-Video cable for better video quality picture to a
component with S-Video capability, such as a VCR or DVD player. When using S-
Video, make sure to connect the two audio cables as well as the S-Video connector.
INPUT 2 Provides connection to a second NTSC (analog) video component such as a
VCR or laserdisc player. Its jacks are the same as described for INPUT 1, above.
INPUT 3 Provides connection to a third NTSC (analog) video component, such as a
VCR or laserdisc. Its jacks are the same as described for INPUTS 1 and 2.
COMPONENT VIDEO INPUT Use to connect an optional component video source,
such as a DVD player. This connection provides optimum quality. Note that it is
essential to match the color coded connectors between a compatible device and the
monitor.
Grey side panels protecting against screen burn-in are not always generated when
watching a 4:3 image via the COMPONENT VIDEO INPUT jacks.
Therefore, limited
viewing of a 4:3 image is recommended when no side panel are present. Also note that
when watching an image via the COMPONENT VIDEO INPUT jacks, you will not be
able to manipulate the screen format.
• AUDIO R/L The audio jacks provide stereo sound. When connected, audio
volume from the main front and rear speakers is variable audio.
• Y P
B
P
R
Unlike a single video input, component video maintains the video
signal as three separate signals through these three jacks. To ensure maximum
picture quality, use three video-grade cables for the Y, P
B
, and P
R
connections.
AUDIO OUTPUTS
• FIXED L/R Provides fixed-level audio output from the television. This audio
output is ideal for audio recording or for connecting to an A/V receiver
amplifier (an auxiliary baseband component) when you want to control the
volume through the A/V receiver instead of the TV.
• VARIABLE L/R Use to connect an A/V receiver or amplifier (an auxiliary
baseband component) for variably-controlled stereo output.
• RIGHT and LEFT Speaker Terminals Use to connect external speakers for right
and left surround sound.
• INT. / EXT. (switch) INT sends audio only to the monitor’s internal speakers.
EXT sends audio to only external speakers.
VIDEO
AUDIO
L R
INPUT1
INPUT2
INPUT3
S-VIDEO
AUDIO
R
L
Y P
B
P
R
COMPONENT VIDEO INPUT
AUDIO OUTPUTS
FIXED
VARIABLE
L R L R
EXT SPEAKERS
EXT
INT
L R
+ +
To turn the TV’s internal
speakers on and off,
press MENU on the
remote control and
choose
Audio. Then
choose Speakers from
the menu.