Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
58
You can enable the OSPF routing function by click on the “Enable” button for OSPF
item. There are 8 area subnets can be defined in the OSPF network and enable them
individually. When you finished setting, click on
“Save”
to store your settings. Above
settings are just for examples.
3.1.5.2.3 BGP
Border Gateway Protocol (BGP) is the protocol backing the core routing decisions on
the Internet. It maintains a table of IP networks or 'prefixes' which designate network
reach-ability among autonomous systems (AS). It is described as a path vector
protocol. BGP does not use traditional Interior Gateway Protocol (IGP) metrics, but
makes routing decisions based on path, network policies and/or rule-sets. For this
reason, it is more appropriately termed a reach-ability protocol rather than routing
protocol.
You can enable the BGP routing function by click on the “Setting” button and fill in the
corresponding setting for your BGP routing configuration. When you finished setting,
click on
“Save”
to store your settings or click
“Undo”
to give up the changes. Above
settings are just for examples.
